|
About EnviroFill
Enviro-Fill has maintained a presence throughout the EPA rule making process and our technology is described in the preamble to the rule as one method of meeting the refueling requirement. Recent ABYC sponsored independent testing of our system showed that it worked perfectly at all the proposed fill rates and heel angles. The system was installed on an ABYC boat for the testing. The universal adaptability of our system is demonstrated in this application where the boat without our system demonstrated severe fill problems. The technology has been proven to get the job done and to ensure it works every time our products are of the highest quality materials and craftsmanship.
Ephrata Precision Parts Inc. was founded in 1972 and has maintained a professional relationship with the owners of Enviro-Fill since 1977. The facility is located in Denver, PA. |
 |
EnviroFill, Inc. Annapolis, MD 21403-4717 ° 443.569.9301
Site content and graphics © Enviro-Fill | Site design © Single Chair
In May of 2005 BoatUS magazine wrote an article on fuel spills and the lack of a solution. As a result of reading that article Enviro-Fill’s founder developed a simple universal system that uses pressure transfer technology (patent pending) to automatically shutoff the nozzle when the fuel in the tank reaches a predetermined level. This technology allows us to fill any size tank and shut off the nozzle automatically every time when the tank is 95% full with no spilling! The fill rate and length of fill and vent hoses have no effect on our systems ability to reliably shut off the nozzle at the predetermined fuel level in the tank. Enviro-Fill was established in October 2005 to make that technology available to boat builders.